Sunday, February 24, 2013

Scaled Agile Framework 3/5 - Program level pipeline management and the program kanban


Introduction

Part 2 of the series concluded with the final stage of the demand management process – 1 or more Epics generated from the COE level initiative and handed off to the relevant delivery groups.  In this post we will explore the lifecycle of an Epic as it travels through the delivery group functioning as an Agile Release Train – Strategic Delivery.

As described in Part 1, the adoption of the Agile Release Train in Strategic Delivery commenced in early 2012 (April).  Whilst it is being continually refined, the implementation has gone through a number of step changes in approach. 

After describing the initial adoption context and approach and covering some of the early experiences, the post will conclude by illustrating the current operating model.

Initial adoption context

At the time of adoption, the group was modelled roughly as follows:
  • 5 project-based Scrum teams all with the same team-shape, following a reasonably similar model and in the final stages of delivery for their projects
  • 1 project-based ‘pseudo-Kanban’ team with 3-4 months remaining on delivery of their project
  • 2 stakeholder-aligned ‘pseudo-Kanban’ teams with very different team shapes and 4-5 months of work remaining in their pipeline
  • A newly formed ‘System Team’ working on implementing a continuous integration capability
  • 10-15 projects running under an outsourced/offshored waterfall model
  • A group of system analysts fulfilling requirements and design elaboration for the waterfall projects
  • 18 project managers
The initial approach was defined in a series of workshops between the general manager of the delivery group and her extended leadership team. The objectives of the workshops were:
  • Establish a shared understanding of SAFe fundamentals
  • Determine the initial implementation model and approach to transitioning/maturing beyond initial implementation
  • Determine the most effective organisational structure for the group
Upon conclusion, the group had reached agreement on the following plan:
  • Immediately establish an Agile Release Train involving the 5 Scrum teams, converting them from project based to stable feature teams. All new work entering the group would be fed to the train.
  • Manage the outsourced waterfall projects through to conclusion.
  • Allow the ‘pseudo-Kanban’ teams to conclude their current commitments, whilst gradually reshaping them to be ready to join the train upon completion.
The organisation to support this had the following structure:
  • Agile Pipeline Management Services (APMS) – composed of the group of project managers from the Scrum teams and the system analysts. Primary responsibility: Manage preparation of the pipeline of work for PSI’s and make sure the teams had the support they needed in delivery.
  • Development Services – run by the equivalent of the “Release Train Engineer” and composed of the feature teams. Primary responsibility: Deliver PSI outcomes
  • Deployment Services – run by the deployment manager and incorporating the System Team. Primary responsibility: Liaise with enterprise release management and operations and ensure smooth deployment and ongoing continuous integration capability uplift.
  • Transition Services – composed of the ‘pseudo-Kanban’ teams and the outsourced waterfall projects/PM’s. Primary responsibility: Ensure graceful conclusion of inflight work whilst preparing the teams for transition onto the train.

Early Days

Some insights into the early experiences of the leadership group in the implementation can be found in this earlier post, but I’ll delve here into a number of key activities.

For the first month or so, it was ‘business as usual’ for the feature teams. They were already operating on the same iteration cadence, and all had a number of sprints committed in order to deliver on existing commitments. The primary focus area was the formation of the APMS group, but before delving into that I’ll briefly cover the feature teams.

Early days for the feature teams

The feature teams basically had two things to do:
  • Become ‘stable feature teams’ instead of project teams 
  • Normalise sizing. 
The first was great fun and fairly trivial. Formerly known by the reference number for the project they were working on (ie the ‘5531 team’), they were asked to select a name for themselves. The name had to be ‘train related’ and ‘safe for work’ – so we wound up with teams such as Maglev and Astrotrain. A simple change but immensely powerful when it comes to sense of identity.

The second was painful. The concept of story point normalisation is perhaps one of the most controversial in SAFe. Having been reluctantly convinced of the need by Dean, I still found that no matter how carefully you approach it you will still be impacted by most of the evils used to argue against the concept. We began by using the past 8 iterations’ metrics for every team to construct a normalisation formula. Simplistically, some teams downshifted their sizing one notch on the Fibonacci scale and other upshifted by one. It was deceptively simple, and one of the key lessons learnt in the time since is that we should have far more actively coached and retrospected on sizing practices.

Early days for APMS

The APMS team had 4 initial objectives:
  • Establish the Epic Kanban system reflecting both the active work in the feature teams and work in the pipeline 
  • Prepare the ‘work in pipe’ and logistics for the first PSI 
  • Work with the rest of the COE (in particular the PMO) to agree governance, financial and other details of how the release train would mesh with the broader enterprise. 
  • Continue to provide project management support to the feature teams
APMS Challenge 1 – Team Formation 

Whilst APMS was composed of PM’s, System Analysts and an architect, there was a ‘no exception’ stance on the release train being ‘Agile top to bottom’. So, the team had a scrum-master and an aspiration to work as a cross-functional team with shared commitments, standups, retrospectives, transparency and accountability to the feature teams. Today, it is a high-performance team with an exceptional team ethic – but the journey was more challenging than for any other agile team I’ve ever worked with. In the end, it required a far larger change of mindset for the team members than for a typical dev team and involved significant tuning of team balance and membership.

APMS Challenge 2 – Feature Grooming: How much is enough? 

The second challenge lay in the approach to grooming features for the PSI. The reality of the funding model and the dependency complexity of the work required a fair amount of analysis and estimation work to create ‘ready to play’ features. The best way to summarise this issue lies in the fundamental paradox of SAFe. Part of the reason the model is so powerful is because when you present it to program/project managers and architects they can readily map it to their existing mental models. On the other hand, the most common criticism I hear from agilists is that it ‘looks too formal and RUP-like’. What we experienced was that the intent of the model is too easily interpreted in practice into waterfall-like behaviours.

The original feature grooming model involved the APMS group identifying the business intent and features for the Epic, resolving the high level architecture and feeding it through a feature team for ‘enough discovery work to size it to +-30% confidence estimates’. The teams would thus hold a portion of their velocity available to be dedicated to these activities, which would be done in parallel with fulfilling their delivery commitments. What eventuated was the analysts/architects in the APMS group identifying and specifying the features and handing fully articulated designs to the teams who then simply estimated the design they’d been handed and handed their estimates back to the PM. This caused no end of problems, and was eventually heavily course corrected as you’ll see once we reach the current-day model.

APMS Challenge 3 – The Product Owner construct 

Prior to the adoption of the release train, finding the right product owners for agile initiatives had been a serious challenge for the group. Given the nature of a data warehouse, there are extremely diverse groups of stakeholders for any given initiative and finding someone with sufficient diversity of domain knowledge, sufficient availability and sufficient empowerment had been entirely unsuccessful. Dean’s “Product Manager/Product Owner” separation was the key to unlocking the puzzle. Whilst we couldn’t employ it exactly as specified in the framework, the underlying principal of separation of concerns was a huge enabler. In standard SAFe, the Product Manager is basically the overall decision maker on prioritisation and scope for the release train whilst the product owner travels with the team. In our context, there could be 15 different funding sources active at once and prioritisation and scope had to belong to the sponsors providing the money.

The solution adopted was to employ “Epic Owners” and “Feature Owners”. The Epic Owner was the person providing the funding for an Epic, and was looked to for engagement at key points and strategic prioritisation and scope calls for their Epic. The Feature Owner, on the other hand, was to have deep domain expertise on a particular feature, have delegated authority within the scope of the feature and be far more actively engaged with the team whilst their feature was in play. The construct resolved a vast number of issues, particularly in addressing the contrast between availability and authority.

APMS Challenge 4: Can we really do PSI’s? 

I’ve left the biggest challenge for last. SAFe deliberately separates the deployment cycle from the PSI cycle. Whilst the PSI produces a ‘potentially shippable increment’, the framework allows for either deployment on the PSI boundary, multiple PSI’s before a deployment or multiple deployments within a PSI. Our intent at launch was to run 8-week PSI’s and use the PSI as a planning boundary with multiple deployments happening in any given PSI.

The first difficulty we encountered was feature shaping. Given that the standard guidance for a feature is ‘small enough to be delivered in a single PSI but large enough to represent a significant outcome for the business’, there was a clash between good feature shaping and deployment window requirements. Available deployment windows were specified by enterprise release management, with 1 per month for minor deployments without significant integration requirements and a varying cadence for ‘enterprise deployments’ with major integration involved. Further, the deployment window for a feature was generally dictated by external dependencies. It was impossible to find a PSI cadence which aligned well with deployment boundaries, and shaping features to PSI’s was also largely impossible as we would regularly encounter features which would need to be deployed 1 iteration into a PSI but needed 2-3 iterations to implement.

Feature shaping was difficult but not insurmountable – in the end, we could have resolved it by allowing ‘cross-PSI’ features whilst still maintaining strong size limitations. However, the ‘bridge-too-far’ lay in establishment of sufficient funded pipeline. Once again driven by enterprise level gating cycles and funding processes, an 8 week PSI that fully funded and committed the entire release train was just not emerging.

By this point, however, we had established significant momentum with every aspect of the release train other than the PSI launch. The pipe was operating, the work was flowing into the teams, deployments were going out the door and momentum was tangible. One large leadership workshop later, we made the call: “know that PSIs will start eventually, but in the meantime develop compensating mechanisms and keep maturing the release train”.

Our focus then turned to compensating mechanisms – what were the key things we lost by not having the PSI, and how could we utilise our knowledge of the principals to achieve the purpose. To my mind, we identified the first 3 of the 5 key ingredients initially:
  • The power of having the whole release train in a planning workshop together from the perspective of developing a sense of ‘release train as one large team with shared outcomes’ as well as ‘release train as team of teams’ 
  • Employing a deliberate set of disciplines to groom out 4 iterations worth of backlogs at the release train level and ensure that visibility, dependency, risks and issues were fully articulated at the story level for all active features. 
  • Release train level ‘Inspect and Adapt’ cycles 
  • Maintenance of a strategic view of capability buildout on the platform that effectively capitalises on synergies between features. 
  • Strategic showcasing and communication of PSI level outcomes to draw together the ‘whole of product’ view of progress for broad stakeholder groups and avoid fragmented and isolated demonstration and communication feature by feature/epic by epic to narrow stakeholder groups. 
I’d like to write that we rapidly implemented effective compensation strategies, but I’d be lying. Being brutally honest, I’d suggest that we initiated effective strategies for the first and third items immediately. Time and painful lessons triggered focus on the second and fourth, and the fifth is currently in the spotlight.

The first strategy was the concept of ‘PSI-lite’, better known as ‘Unity Day’. A 1-hour ‘whole of train’ session at the start of each sprint aimed at building a sense of ‘train as team’ and ensuring everyone started the sprint on the same page. These have been incredibly powerful from a cultural transformation perspective. They are always attended by numerous visitors, and repeat attendees regularly comment on the tangible change in atmosphere over time.  (for a deeper treatment, see this post)

The second strategy involved the establishment of ‘Team Loco 131’, composed of the extended leadership group and functioning as a ‘program level continuous improvement team’. Their stories are generated through learning generated by various forms of retrospective, and the leaders are fully bought into the lean management model of taking responsibility for improving the system of work.

Whilst the story of addressing backlog grooming challenges is too long and torturous to describe here, I will offer the following. Many organisations find the investment of putting a whole program and set of stakeholders in a room for 2 days planning every 8-10 weeks unpalatable. For Strategic Delivery, this commitment was one of the major sticking points in management workshops – although the general manager bought in and was willing to support it, most of her leadership group felt it was unjustifiable. I’ve heard similar stories from many other SAFe Program Consultants. Our journey, painful lessons and ongoing investment required to compensate in the area of release train level backlog grooming/planning have utterly convinced me of the vital importance of this activity. To put my systems thinking hat on, failure to implement effective PSI planning creates an insane amount of failure demand across the entire release train. Weighing the cost of the failure demand against the investment required for the PSI planning days provides a scale very heavily tipped towards the investment. 

The Program Kanban



Before digging into the specifics of how the Program (or Epic) kanban operates today, there are two final points to cover off. The first involves a holistic view across both the initiative level kanban system and the epic level. Astute readers will notice a number of glaring inefficiencies between the two. Whilst I’ll cover this in a little more detail in the concluding post for the series, I will offer a reminder at this time that the purpose of explicit visualisation in a kanban is to bring to light waste and opportunity.

The second point is that whilst this blog series focuses on wall visualisations, every wall depicted is replicated in Rally with far more underlying detail. The Rally Portfolio Management capability is a key enabler in effective management and measurement of the system, whilst the walls are vital for tactile insight and facilitation of communication.

The Epic Kanban is, obviously, dedicated to the flow of an Epic through the release train value chain.  Every card on the wall is an Epic.   The value chain is divided into 5 phases, each with a number of states:
  • Initiate Phase: Transition from demand management and connection with stakeholders.   
  • Discovery Phase: Feature elaboration and estimation refinement
  • Launch Phase: Approvals, funding and preparation to drop into teams for implementation
  • Evolve Phase: Implementation
  • Operate Phase: Deployment and follow-through to ensure happy users and successful transition to operations.
One of the primary aspects of the phases is to indicate the flow of responsibility between APMS, Development Services and Deployment Services. For any given phase, one group will be ‘moving the Epic’ and the others will be either supporting or being kept informed.  You'll notice on the photo there are phases which have "rows" as well as "columns".  The rows indicate teams, whilst the columns indicate states.  Any state which has rows is one where a feature team has the ball - you'll notice photos in the start of each swimlane in the "Prepare Discover" state indicating which team is which.

On the day PSI’s become viable for this train, the phases and states will change very little. Initiate & Discover effectively involve the identification, sizing and prioritisation of features in preparation for PSI injection and maintenance of roadmap, Launch equates to locking in PSI content and executing PSI planning, and Evolve is delivery of the PSI.

The Initiate Phase


This phase is led by APMS and basically loads the Epic onto the train. The primary goals are as follows: 
  • Execute handover with the demand management group (‘PMO’ and ‘Validate Entry’ states) 
  • Connect with the Epic Owner, ensure their value drivers for the epic are clearly articulated and introduce them to the operating model (‘Envision’ state) 
  • Identify candidate feature owners ( ‘Envision’ state) 
  • Determine the feature team which will execute discovery, the sprint when it will occur, and ensure logistics are organised for discovery to proceed smoothly. (‘Prepare discovery’ state) 
This phase is the primary evidence of the response to ‘APMS Challenge 2’. It explicitly limits the amount and nature of the work done by APMS before connecting the Epic and Feature owners with the teams for further analysis. In effect, it eliminated roughly 70% of the preparation work that was initially being conducted.

Looking at the wall, you'll see one epic that's just landed from demand management (with the smurf avatar on it indicating the project manager who's pulled the card).  One is in the envisioning state, one has completed envisioning but is blocked from being pulled into discovery preparation (the big red "X" on it).  Finally, there is one epic being prepared to drop into Discovery with the Astrotrain team.

The Discovery Phase


Discovery is led by the feature teams, and involves working with the Epic and Feature owners to ‘discover the features’ and explore the feature level requirements sufficiently to articulate and size the outcomes. A feature team will typically have roughly 10% of their sprint capacity dedicated to discovery work, with discovery for most epics concluding within a single sprint. The flow of states is as follows:
  • Kickoff Discovery: Workshop with Epic Owner and all Feature Owners to gain understanding of the vision for the epic, determine the exploration workshops required, identify key risks/issues and ensure the stakeholders understand the discovery process.
  • Explore Features: Detailed workshops with feature owners to validate the feature composition, high level stories and feature level acceptance criteria.
  • Consolidation: Consolidation of the outputs from feature exploration workshops, estimation and preparation of a high level release plan.
  • Discovery Outcome: Presentation back to Epic and Feature Owners of consolidated discovery outputs for validation and agreement of outcomes
The key outcome of Discovery is a set of prioritised, well-groomed features which have been estimated to a +- 30% level confidence and are ‘ready to play’ for implementation. The other potential outcome is an ‘Epic split’. Once an Epic starts to look larger than half a million dollars, the preferred approach is to identify the highest priority features for initial implementation and carve off the remainder into a new Epic for a future release. In PSI parlance, it’s making sure no more than roughly a PSI worth of features are progressed at once on the Epic.
Looking at the wall, you'll see Astrotrain finalising Discovery for one Epic, Kaizen (3rd row) finalising one and kicking off another and Maglev consolidating one set of outputs whilst kicking off another.  It's  unusual for a team to have more than one Epic in Discovery at a time, in this case it's likely that they are small Epics which minimal feature elaboration required.

Launch Phase



This phase is reasonably self-explanatory. The focus returns to APMS, who look after gaining the appropriate approvals of the discovery outcomes and funding to proceed. Whilst in an ideal world this phase would be traversed rapidly to achieve a smooth flow from discovery to evolve, the reality is epics regularly sit here for significant periods whilst business cases gain approval and enterprise gating cycles complete. It has generated one simple and obvious insight – the better the Initiate and Discovery phases are executed, the shorter and smoother the launch phase process.

Launch concludes with evolve preparation. The feature team or teams to execute evolve are identified, logistics are organised for the release planning session at the start of evolve, the commencement sprint is locked in and the feature teams re-familiarise themselves with the discovery outcomes.

The key aspect to evolve preparation is feature team selection. Obviously, the ideal scenario is for the entire epic to land with a single feature team and for the evolve feature team to be the same one which executed discovery. However, reality intervenes. Whilst evolve capacity availability is utilised in selecting the discovery team, when the launch phase is protracted that team is often not available for evolve. In these scenarios, some capacity is reserved in the backlog of the discovery team to ensure they are available to support the kickoff and rapid knowledge uptake of the evolve team(s). Likewise, where the Epic is too large to be executed by a single feature team, work will be spread across feature teams on a feature by feature basis.

Looking at the photo, you'll notice a few things.  Firstly, queues are very visible :)  Secondly, although the APMS team runs a kanban system for their work (as hinted at by the epic level cumulative flow diagram and control chart on the wall), they also track the sprint (or iteration) cadence.  Their priorities on any given day are driven by where in the sprint cadence the feature teams are.   Finally you'll see the cards with post-its on them ('1', '2' and '4').  These would have been identified at the standup that day as needing urgent attention.

Evolve Phase


Implementation and deployment of the epic will be covered in the next post, so I will keep this section intentionally light. The states are as follows:
  • Plan Release: Execute the release planning which would normally occur in a PSI planning session. The stories identified in discovery are broken down into ‘sprint-size’ and scheduled across sprints based on available capacity to create an initial release plan. One of the key outcomes of this workshop is establishment of working agreements with the feature owners. They know which sprints their feature will be active in, when acceptance testing for their feature will occur and can plan their availability accordingly. 
  • Implement: Build and acceptance testing of features. 
  • Integrate and Prep Deployment: This phase has a split personality depending on deployment type. For an ‘independent deployment’, it takes roughly a week and involves standard integration, deployment hardening and operational handover preparation activities. For deployments associated with an enterprise release (75-80%), it lasts 4-5 sprints. The work cannot be accelerated, as the timing and nature of involvement is dependent on enterprise level co-ordination. Teams thus wind up with a trickle-feed capacity reservation during this time. 

Looking at the wall, you'll see Astrotrain juggling 3 Epics in implementation, with a 'stakeholder concern flag' on one probably giving hints as to why another Epic is being prepared to drop into the team.  Moving down the board, Jacobite are implementing a single (large) Epic, Kaizen have one in implementation and are most likely getting close to done there based on the fact they're in release planning on a second.  Maglev have a more even spread, with 5 epics at various stages of Evolve.

Fans of limiting WIP (presumably most readers of this blog) are probably looking at this picture and saying "why aren't they finishing one Epic before starting the next".  My first, somewhat glib, response is "isn't it great that it's so obvious".  On a more serious note, in a highly integrated world you often can't go at full pace on a single initiative.  It has fast times and slow times as you synchronise with your interface partners and resolve other such dependencies.  Having the flexibility to deal with this has been a very important aspect of the framework success.

Operate Phase


Under the leadership of deployment services, the epic is deployed and in operation.  Whilst numerous ‘tidy-up’ activities around production verification testing and governance closure occur here, the key component introduced has been the Epic retrospective.  This closes a significant gap in the PSI Inspect and Adapt cycle.  Whilst numerous ‘release train’ feedback cycles existed, what was missing was the stakeholder learning.  The feature team holds a retrospective with their epic and feature owners looking at the ‘whole of lifecycle experience’, and an invaluable source of strategic learnings is introduced.

The second state is ‘Spanked’. It is the cause of much hilarity amongst visitors, but has become part of the cultural identity of the release train. Originally introduced for some personality on a team kanban wall by an English scrum-master, it stands for ‘done done’. The Epic’s in production, the customers are happy, and the team has ‘spanked it’.Looking at the wall, it's fairly easy to conclude that it's not long since a major deployment window.

Conclusion


The daily rhythm of all the groups will be covered in the next post, but it’s worth making a few concluding comments here. The first is to play back to Dean’s concept of the release train as a ‘self organising program’. Effective visualisation of the epic lifecycle is a vital ingredient, as it generates so much ‘knowledge at a glance’ of the state of play of the entire value chain. Within seconds, the group can identify what epics are where in the value chain, who has carriage, where the queues are and what needs focus. And of course, metric analysis through cumulative flow and cycle time charting at the Epic level. All of this across a system of work that at any given time generally has 30-40 epics somewhere in the value chain.

I'll close with a hint of things to come when we talk about results in the final post for the series. You might remember a mention of 18 project managers in the initial context at the beginning of the post - there are now 3.

PS Part 4 in the series is now posted and deals with the program level feature wall and in-play work.

56 comments:

  1. What a sensational blog! This blog is too much amazing in all aspects. Especially, it looks awesome and the content available on it is utmost qualitative. safe release train engineer

    ReplyDelete
  2. One can think of several metaphorical comparisons to describe software development, such as writing a book or building a house. Some of them are a good light in the dark, some are rather misleading. website services and support

    ReplyDelete
  3. One can think of several metaphorical comparisons to describe software development, such as writing a book or building a house. Some of them are a good light in the dark, some are rather misleading. download

    ReplyDelete
  4. It's very frustrating to have spyware and adware in your computer because these programs can harm your software programs plus your hardware. If you use the world wide web, these types of bugs can be very annoying. They are a regular occurrence that we occasionally tend to ignore but God forbid we must in no way agree to. Legitimate Hire a Hacker in Singapore

    ReplyDelete
  5. Writing in style and getting good compliments on the article is hard enough, to be honest, but you did it so calmly and with such a great feeling and got the job done. This item is owned with style and I give it a nice compliment. Better!

    Data Analytics Course in Bangalore

    ReplyDelete
  6. Happy to chat on your blog, I feel like I can't wait to read more reliable posts and think we all want to thank many blog posts to share with us.

    Artificial Intelligence Course in Bangalore

    ReplyDelete
  7. The rising demand for mobile applications to streamline the business processes has posed a serious challenge in front of developers to adopt rapid and ideal development process, to deliver quality software product. The basic requirements of the user tend to alter at a fast pace, hence contemplative planning for the building of customer-centric mobile application becomes essential. Every smartphone users desire to fetch the most out of their application and they would promptly switch to the next closer alternative, if the existing one fails to meet their expectations. This is where, the crucial need for agile mobile development procedure comes into play. Anxiety Treatment South Melbourne

    ReplyDelete
  8. We all know what a software is and what are the basic skills needed to develop one, but what many of us don't know is what are the phases involved in developing a new software. This article will tell you what is SDLC i.e. the phases involved in developing a new software. Siteklean

    ReplyDelete
  9. One can think of several metaphorical comparisons to describe software development, such as writing a book or building a house. Some of them are a good light in the dark, some are rather misleading. CAD4Sale

    ReplyDelete
  10. One can think of several metaphorical comparisons to describe software development, such as writing a book or building a house. Some of them are a good light in the dark, some are rather misleading. delivery route planner

    ReplyDelete
  11. Thank you for this. Thats all I can say. You most definitely have made this into something thats eye opening and important. You clearly know so much about the subject, youve covered so many bases. Great stuff from this part of the internet. 토토사이트

    ReplyDelete
  12. Jason Sudeikis’s character Kurt is a hard working man who has a very nice boss, whose tragic incident leaves the company in the hands of his bullying, cocaine-addicted son, played by Colin Farrell. 메리트카지노

    ReplyDelete
  13. I am really enjoying reading your well written articles. It’s hard to come by experienced people about this subject, but you seem like you know what you’re talking about! Thanks.

    Java Training in Chennai

    Java Course in Chennai

    ReplyDelete
  14. Software testing is an important part of the systems development life cycle. It has its own phase in the process and has its own specialised IT professionals. Why is it so important? What would happen if we didn't do software testing? Read on to find out more. route plan software

    ReplyDelete
  15. The practice of technology transfer can greatly benefit an organization. What is technology transfer? Technology transfer is the sharing of technology between two or more organizations. fake id usa

    ReplyDelete
  16. A lot of cheap Ugg Boots are around in the market today, but most of the time these boots are fakes. Find out how to spot fake ugg boots when you are shopping for cheap ones. 2021 fake id

    ReplyDelete
  17. Thank you for this. Thats all I can say. You most definitely have made this into something thats eye opening and important. You clearly know so much about the subject, youve covered so many bases. Great stuff from this part of the internet. Lumion 10.3.2 Pro sale

    ReplyDelete
  18. Every business has diverse needs and need to implement efficient software solutions which can improve work flow, processes and output. Most of the software in use is called 'Commercial off-the-shelf' (COTS) software, also called as Packaged Software. How to Delete a YouTube Video

    ReplyDelete
  19. Thanks, thanks for the awesome blog post. I’m having troubles subscribing to your blogs feed. Thought I’d let you know Autodesk AutoCAD Plant 3D 2021 sale

    ReplyDelete
  20. Wonderful blog found to be very impressive to come across such an awesome blog. I should really appreciate the blogger for the efforts they have put in to develop such an amazing content for all the curious readers who are very keen of being updated across every corner. Ultimately, this is an awesome experience for the readers. Anyways, thanks a lot and keep sharing the content in future too.

    Digital Marketing Training in Bangalore

    ReplyDelete
  21. Truly mind blowing blog went amazed with the subject they have developed the content. These kind of posts really helpful to gain the knowledge of unknown things which surely triggers to motivate and learn the new innovative contents. Hope you deliver the similar successive contents forthcoming as well.

    Cyber Security Course

    ReplyDelete
  22. Any time you connect with the administrations of an expert, you are basically going into an agreement. Since an agreement is lawfully restricting, you need to guarantee that you are ensured as to legitimate issue. The primary thing you would need to check is that the handyman has a substantial permit.this website

    ReplyDelete
  23. Happy to chat on your blog, I feel like I can't wait to read more reliable posts and think we all want to thank many blog posts to share with us.

    Data Science Training in Bangalore

    ReplyDelete
  24. Her blog has given us valuable information to work on. Every tip in your post is amazing. Thank you so much for sharing. Keep blogging.

    Digital Marketing Course in Bangalore

    ReplyDelete
  25. I am a new user of this site, so here I saw several articles and posts published on this site, I am more interested in some of them, hope you will provide more information on these topics in your next articles.

    Best Data Science Courses in Bangalore

    ReplyDelete
  26. Positive site, where did u come up with the information on this posting?I
    have read a few of the articles on your website now, and I really like your
    style. satta matka

    ReplyDelete
  27. The typical use for a VPN or private virtual network connection is through remote workers of companies, to enable to gain access to the company's local network when working from home or other remote places. With VPN in use, employees are able to access securely the office printer, external hard drives, and files, without physically being there. VPN can also be utilized for personal use, especially when you connect outside your home quite often. the best free vpn

    ReplyDelete
  28. In today's world, people are traveling farther and faster than ever before. As they are traveling, they need mobile devices that can travel with them. Many countries are now enforcing regulations that restrict access to the Internet. free vpn for google chrome

    ReplyDelete
  29. This article compares and contrasts Proprietary software and Open Source Software. This is an extremely relevant and hot area of the software business all over the world. windows 10 product key

    ReplyDelete
  30. 토토사이트 & 안전놀이터 추천은 토토식스
    토토식스에서는 가장 안전한 토토사이트와 안전놀이터 그리고 메이저사이트를 소개해드리고 있습니다.

    구글 검색결과에 단 한번의 먹튀사고도 없는 오랜 운영기간으로 자리잡힌 메이저놀이터만을 선별하여 방문자들에게

    즐거운 스포츠토토를 즐길 수 있는 환경을 제공하도록 항상 노력하겠습니다 메이저사이트
    .

    ReplyDelete
  31. The typical use for a VPN or private virtual network connection is through remote workers of companies, to enable to gain access to the company's local network when working from home or other remote places. With VPN in use, employees are able to access securely the office printer, external hard drives, and files, without physically being there. VPN can also be utilized for personal use, especially when you connect outside your home quite often. free vpn for streaming

    ReplyDelete
  32. VPN stands for virtual private network and is commonly used by organizations to provide remote access to a secure organizational network. For instance, you are working from home and you need to access files in your computer at the office or connect to applications that are available only via your office network. If your office has VPN installed and your laptop or home computer is configured to connect to it, you can get what you need from the office without having to worry about the security of the data transported over the Internet. cnet best free vpn

    ReplyDelete
  33. With the increasing number of people using Microsoft Office 2007 and WPS Office 2012, you may think that your Microsoft Office 2003 is out of fashion, and the version of Microsoft Office is not as useful as that of the new version. So you want to use Microsoft Office 2007 or WPS Office 2012. However, before you install the new office softwares, you need to remove the original ones from your computer, because the unnecessary office softwares take up a lot of memory space, which can increase the usage of your CPU. However, do you know how to remove them completely? microsoft office professional plus 2019

    ReplyDelete
  34. Based on our research, cleaning services professionals searching for janitorial software to improve and expand their businesses, would do well to keep the title of this article firmly in mind when conducting their search for a suitable product for their business. Here's how we went about our search and what we found. Beginning the Search: Below is a list of alternative search phrases that Google returned when we typed the phrase "janitorial software" into their search engine, recently. Asia

    ReplyDelete
  35. Employing software testing methods can have its disadvantages. For one, it can cause undesirable delays in releasing a newly developed software. Despite this, however, software testing is still employed by most software developing companies. Aside from the fact that software testing is part of the standard protocols in software development strategy that should be observed, there are a number of benefits that can outweigh the delays that can be caused by software testing. Software

    ReplyDelete
  36. Based on our research, cleaning services professionals searching for janitorial software to improve and expand their businesses, would do well to keep the title of this article firmly in mind when conducting their search for a suitable product for their business. Here's how we went about our search and what we found. Beginning the Search: Below is a list of alternative search phrases that Google returned when we typed the phrase "janitorial software" into their search engine, recently. help with programming homework

    ReplyDelete
  37. Organisations decide to select new Enterprise Software packages for a variety of reasons. Business growth may lead to the need for a more robust solution with wider functionality and the ability to deal with multi-site, multi-country operations. Legacy systems may be regarded as old fashioned and lacking in up to date functionality. Corporate acquisition may lead to the need for systems harmonisation across a group and a new group-wide strategy may be called for resulting in the need for a new system. do my programming homework

    ReplyDelete
  38. Employing software testing methods can have its disadvantages. For one, it can cause undesirable delays in releasing a newly developed software. Despite this, however, software testing is still employed by most software developing companies. Aside from the fact that software testing is part of the standard protocols in software development strategy that should be observed, there are a number of benefits that can outweigh the delays that can be caused by software testing. programming homework help

    ReplyDelete
  39. The typical use for a VPN or private virtual network connection is through remote workers of companies, to enable to gain access to the company's local network when working from home or other remote places. With VPN in use, employees are able to access securely the office printer, external hard drives, and files, without physically being there. VPN can also be utilized for personal use, especially when you connect outside your home quite often. telenicosia.it

    ReplyDelete
  40. "But, the fire is so delightful" are the lyrics to a favorite carol that bring thoughts of a warm cozy day at home snuggled up to a cup of cocoa and your office laptop. Well, maybe the latter wasn't what you envisioned, but the advances in today's technology have made this a viable option. Virtural Private Networks (VPNs) secure your connection when accessing your company's server remotely. pianetastrega.com vpn

    ReplyDelete
  41. It’s actually a cool and helpful piece of information. I am happy that you simply shared this useful information with us. Please keep us up to date like this. Thank you for sharing.| 카지노사이트

    ReplyDelete
  42. You have completed certain reliable points there. I did some research on the subject and found that almost everyone will agree with your blog.

    Data Science Training in Hyderabad

    ReplyDelete
  43. This is such a great post, and was thinking much the same myself. Another great update…

    Data Science Training in Hyderabad

    ReplyDelete
  44. Now is the perfect time to plan for the future and now is the time to be happy. I have read this article and if I can I want to suggest some interesting things or suggestions to you. Perhaps you could write future articles that reference this article. I want to know more!
    Best Data Science Courses in Bangalore

    ReplyDelete
  45. Cooking is not a duty. It is an art. Those who have understood this have always cooked scrumptious food. I used to work for a software company and cooking was a duty for me. I have always whined about cooking and never was happy to cook. Now that I quit my job, I have no other option than to cook. Initially, I was lazy and always complaining.Time went on and nothing changed. I had to cook! Finally, I decided to make cooking a delight. I tried out various recipes and finally found that cooking is an art! kép bằng

    ReplyDelete
  46. Learning to read and cook a recipe is an enormous way to process how to blend the different flavors found in food. Learning to read a recipe is a very beneficial household skill that many people take for granted. số đề 12 con giáp

    ReplyDelete
  47. Matka is today one of the most popular games within lottery loving people. I am finding the game most entertaining. In addition, it gives me opportunity to earn money too.

    ReplyDelete
  48. You have completed certain reliable points there. I did some research on the subject and found that almost everyone will agree with your blog.

    Data Scientist Training and Placement Bangalore

    ReplyDelete
  49. Very good message. I came across your blog and wanted to tell you that I really enjoyed reading your articles.


    Best Cyber Security Training Institute in Bangalore

    ReplyDelete
  50. Superbly written article, if all bloggers offered the same content as you, the internet would be a much better place ...

    Data Science Course in Patna

    ReplyDelete
  51. Really, this article is truly one of the best in article history. I am a collector of old "items" and sometimes read new items if I find them interesting. And this one that I found quite fascinating and should be part of my collection. Very good work!

    Data Scientist Training in Bangalore

    ReplyDelete
  52. Very informative message! There is so much information here that can help any business get started with a successful social media campaign!

    Data Science Training Institutes in Bangalore

    ReplyDelete
  53. wow ... what a great blog, this writer who wrote this article is really a great blogger, this article inspires me so much to be a better person.

    Business Analytics Course in Nagpur

    ReplyDelete
  54. I am delighted to discover this page. I must thank you for the time you devoted to this particularly fantastic reading !! I really liked each part very much and also bookmarked you to see new information on your site.

    Business Analytics Course in Durgapur

    ReplyDelete
  55. Interesting post. which i wondered about this issue so thanks for posting and very good article which is a really very nice and useful article. Thank you
    Data Science Course in Noida

    ReplyDelete